[. . . ] For detailed information about their full range of features, consult the latest User Guides on www. irislink. com/support/userguides. The descriptions in this guide are based on the Windows® 7 and Mac® OS Lion Operating System. All information is subject to change without prior notice. Table of Contents Step 1: Check the Accessories Step 2:  nstall Readiris™, the Scanner Driver and the other Software I Applications. [. . . ] •  Instead of the regular power cable, you can also use the USB power cable. Step 4: Power ON the Scanner • Turn the power knob clockwise to any of the numbers. • The LED will light up red, and then turn green.  Note: if the LED stays red while the scanner is connected to your computer, this means a problem occurred. You need to select the IRIScan™ as scan source inside a scanning application first. •  the driver is installed successfully, a balloon message appears on the task bar If (in Windows). Step 5: Scanning Documents The IRIScan™ Pro 3 Cloud can scan documents of different sizes, ranging from business cards to A4/Legal. You can use it to scan stacks of documents using the document feeder, or scan sheets separately using the detachable base unit. IMPORTANT: the scanner must be used from within scanning applications, such as Readiris™ and Cardiris™. Pushing the Scan button as such does not work, unless the Button Manager (PC only) is installed and configured correctly. Refer to the Readiris™ and Cardiris™ Quick User Guides on the DVD-ROM to learn how to use these applications with the scanner. English English Using the Document Feeder 1. Align the document guides with both edges of the document. Tip: make sure the front input tray remains closed when using the document feeder. Using the Base Unit 1. Center the document using the paper size marks on the tray. Detaching the base unit from the document feeder The base unit can be detached from the document feeder. Press and hold down the release button at the bottom right side of the scanner. Tilt the base unit towards you, and then detach it from the feeder. Step 6: Using the Button Manager (PC only) To use the scanner buttons you need to configure the Button Manager. 2. The Button Manager appears in the bottom right corner of the screen. Make sure the scanner is powered ON. English English Notice that the first 3 buttons are preconfigured. You can configure up to 9 buttons to scan your documents to your favourite output formats and applications. [. . . ] Then press Scan on the scanner to scan directly to Readiris™. English English Tips Checking and replacing the ADF pad assembly Check if the ADF (automatic document feeder) pad assembly is mounted correctly at the back of the scanner: 1.  ress down the 2 latches at the back of the P document feeder to open the rear cover. 3.  he rubber part of the pad assembly should be T inserted in the slot. 4. [. . . ]